www.mexicoindustrial.net
24
'17
Written on Modified on
SOURIAU – SUNBANK Connection Technologies
La serie JMX de conectores plásticos tipo push-pull para aplicaciones médicas
La serie JMX de Esterline Connection Technologies - SOURIAU tiene un conector de plástico tipo push-pull para utilizar en la industria médica con un diseño que permite su uso a cualquier profesional de medicina.
With the inline control, the raising and lowering of the load is carried out intuitively through the action of the control handle. The operator controls all the movement with one hand. In effect, the handle is 100% sensitive, and the speed of motion is thus proportionate to the effort applied by the operator. The load can be positioned effectively and directly onto the component with an effort equivalent to 5% of its own mass.
If no pressure is applied to the control handle, the load remains balanced no matter where the load balancer is located on its translation area. With a simple pneumatic sensor on the gripper, two different loads can be balanced very easily: the empty gripper or the gripper with the component to be handled. The inline control adapts, furthermore, to a wide range of loads, starting at around 80% of a load balancer’s capacity.
The installation of the inline control is particularly easy because it works completely by pneumatics. The majority of parts (control box, control cable, control handle, grippers, etc ) are standard Ingersoll Rand products. Being 100% pneumatic also eases maintenance operations and guarantees a greater reliability in cases of intensive use.
The Ingersoll Rand teams offer an inline control model that is best suited to where it will be used according to the following criteria: rails, brackets, manipulator arms, cycle time, vertical running, horizontal movement, number of loads and their weight, type of gripper and components, and total height availability.
The Solutions team at Ingersoll Rand can also develop a specific, customized gripper on demand.
Press contact:
Ingersoll-Rand
Aymeric Dupont-Franklin, This email address is being protected from spambots. You need JavaScript enabled to view it.
If no pressure is applied to the control handle, the load remains balanced no matter where the load balancer is located on its translation area. With a simple pneumatic sensor on the gripper, two different loads can be balanced very easily: the empty gripper or the gripper with the component to be handled. The inline control adapts, furthermore, to a wide range of loads, starting at around 80% of a load balancer’s capacity.
The installation of the inline control is particularly easy because it works completely by pneumatics. The majority of parts (control box, control cable, control handle, grippers, etc ) are standard Ingersoll Rand products. Being 100% pneumatic also eases maintenance operations and guarantees a greater reliability in cases of intensive use.
The Ingersoll Rand teams offer an inline control model that is best suited to where it will be used according to the following criteria: rails, brackets, manipulator arms, cycle time, vertical running, horizontal movement, number of loads and their weight, type of gripper and components, and total height availability.
The Solutions team at Ingersoll Rand can also develop a specific, customized gripper on demand.
Press contact:
Ingersoll-Rand
Aymeric Dupont-Franklin, This email address is being protected from spambots. You need JavaScript enabled to view it.
